Penerapan K3 ( Keselamatan dan Kesehatan Kerja ) Pada Karyawan Pabrik Kripik Tuntungan Dalam Upaya Mencegah Kecelakaan Kerja

Authors

  • Yughni Aulia Nabila Universitas Islam Negeri Sumatera Utara
  • Nurdiana Tanjung Universitas Islam Negeri Sumatera Utara
  • Sandiyatun Daulay Universitas Islam Negeri Sumatera Utara
  • Abdurrozzaq Hasibuan Universitas Islam Negeri Sumatera Utara

DOI:

https://doi.org/10.62383/quwell.v1i2.298

Keywords:

K3, Work accidents, Prevention, Application

Abstract

Occupational Health and Safety (K3) are the steps we take to create a healthy and safe work environment, with the aim of reducing the possibility of work accidents or illnesses due to negligence which can result in decreased work enthusiasm and productivity. In accordance with the Basic Health Law of the Republic of Indonesia no. 9 of 1960 Part I Article II, Occupational Health refers to health conditions which aim to ensure that workers obtain an optimal level of health physically, spiritually and socially, through efforts to prevent and treat diseases or health problems caused by work, the work environment , as well as general illnesses. This research was conducted in two stages using a descriptive survey method which included field surveys and observations of the environment and work processes. The aim of this research is to prevent work accidents among chip factory workers. Although employees have implemented OSH efforts in the workplace, there is still room for further improvement in the long term.

References

Aprilliani, C. F. F. (2022). Keselamatan dan Kesehatan Kerja (K3). Padang: PT. Teknologi Eksekutif Global.

Myrtanti, R. D., & Suardika, I. B. (2022). Penerapan keselamatan dan kesehatan kerja pada pekerja bagian produksi di industri pencacah plastik dengan menggunakan fault tree analysis (FTA). Jurnal Rekayasa Sistem Industri, 78-83.

Pirmansyah, M. S., & Hakim, A. (2022). Penerapan K3 dalam meningkatkan safety area produksi pada UMKM Aneka Kerupuk Alma Jaya khas Desa Sindangsari. Jurnal Pengabdian Mahasiswa, 2(1).

Ramadhan, A. R., & Momon, A. (2022). Tinjauan keselamatan kerja dengan metode hazard and operability study (Hazop). Jurnal Ilmiah Wahana Pendidikan, 8(9), 51-67.

Rizal, L. M. (2016). Penerapan SMK3 di lingkungan kerja manufaktur produk makanan dan minuman. Bina Teknika, 1-10.

Published

2024-05-28

How to Cite

Yughni Aulia Nabila, Nurdiana Tanjung, Sandiyatun Daulay, & Abdurrozzaq Hasibuan. (2024). Penerapan K3 ( Keselamatan dan Kesehatan Kerja ) Pada Karyawan Pabrik Kripik Tuntungan Dalam Upaya Mencegah Kecelakaan Kerja. Quantum Wellness : Jurnal Ilmu Kesehatan, 1(2), 122–131. https://doi.org/10.62383/quwell.v1i2.298